How to Unbrick Hardbricked Meizu Devices

Meizu M6 Note

This is an Unbrick Project page for Meizu M6 Note devices. On this page, we provide solutions suitable for all bricked Meizu M6 Note devices so that concerned users can unbrick their bricked Meizu M6 Note devices.
This Meizu M6 Note Unbrick Project is maintained by ArykTECH - thanks to our sponsor(s) and contributors, testers.
Have a device you want us open Unbrick Project for? Open Unbrick Project Here

Unbrick Project Page Link Map
Project Info Bricked Meizu M6 Note Issues
Unbrick Meizu M6 Note with QFIL Unbrick Meizu M6 Note with Loader

NOTE: this is a closed project which means you must subscribe to gain access to the Unbrick Files for your Meizu M6 Note device.
Subscribe Here

Project Info
Targeted Device(s): Meizu M6 Note Variants
Initial Sponsor(s) ArykTECH
Devs/Maintainer(s) U_John ([email protected])
Project Status Ready. Working
Project Progress We have:
  • A Meizu M6 Note variant working with
  • A Sponsor
  • Contacted U_John
  • Device Partition Table Retrieved
  • Working Loader file pulled
  • Method(s) Deployed:
  • QFIL Method
  • Loader Method
  • *Hardware Method

  • How to Know When A Meizu M6 Note is Bricked

    You know your Meizu M6 Note is bricked when it no longer boot up, blinks the led light, detected as HS-USB Bulk, HS-USB QDLoader, HS-USB DLoader 9008 and the likes on your PC device manager screen or the device ends up in bootloop.
    Besides all that are listed above, there are several other signals to know an Android device is bricked, this page attempts to solve all Meizu M6 Note brick issues.

    How to Unbrick Meizu M6 Note Devices

    On this page, we attempt to deploy three methods which include the QFIL and Loader method of unbricking Meizu M6 Note devices. The last method which is the hardware method is not discussed on this page rather, it is reserved for this project subscribers and it is revealed via our one-on-one guides on either Whatsapp or Telegram channel.
    In the paragraphs that follow below here, we illustrate how to unbrick your Meizu M6 Note device using either QFIL or the Loader method.

    To Unbrick Meizu M6 Note By QFIL Method

    1. Download the contents of the QFIL Folder from the Meizu M6 Note Unbrick Project Folder and Extract them onto a folder on your PC.

    2. Download HS-USB QDLoader Drivers here and install it on your PC.

    3. Open the Meizu M6 Note QFIL Files folder on your PC to view its content.

    4. Launch (Open) QFIL on your PC. You may download latest QPST from here if not installed on your PC yet.

    5. Now, on QFIL, choose Flat Build and for programmer choose the firehose file seen in the QFIL Files folder you opened in Step 3 above.

    6. Click Load XML and choose rawprogam0.xml and patch0.xml both in the QFIL Files folder in which the Firehose file is located.

    7. Finally, click Download. QFIL should successfully download the files on your Meizu M6 Note.
    Once QFIL has successfully downloaded the files, your Meizu M6 Note should reboot automatically. Note that first boot may take up to 15 minutes to complete!
    For graphical illustration, see here: How to Unbrick Qualcomm Devices Using QPST QFIL

    To Unbrick Meizu M6 Note By Loader Method

    1. From the Meizu M6 Note Unbrick Project Folder, download the loader file and extract it onto a folder on your PC.

    2. Now, format your SD Card. exFAT is preferred.

    3. Download DiskImageRev2 from here and extract it onto a folder on your PC then, open it.

    4. Slot your SD Card in a card reader and connect it to your PC.

    5. Launch DiskImageRev2 on your PC - as Admin preferably.

    6. On launch, DiskImageRev2 should detect and display the drive where your SD Card is connected. If otherwise, browse to select the correct drive.

    7. From DiskImageRev2, browse to the folder where you saved / copied the Meizu M6 Note Loader.img file on your PC and select it.

    8. Now, click Write and wait until DiskImageRev2 completes the process.

    9. Once DiskImageRev2 has successfully written the files on the SD Card, your SD Card is now bootable! You may now insert it on your Meizu M6 Note and boot the device using its bootloader key combo.

      Brief Note:

      The Loader method requires a full ROM Dump also known as a full blk0 backup of a working Meizu M6 Note correctly flashed or written on a pretty good and fast class 10 SD Card.

      That said, we might be able to unbrick Meizu M6 Note using the same method.

    Similar Devices Unbrick Project Page Links:


    to top